Installation guide

27 | Page Celestix HOTPin Appliance Installation Guide
5. Enter a send address in the From field.
6. Enter your network’s SMTP gateway name or IP address in the With
field.
7. To test the email delivery, click Test Settings.
Note: The alert email function will indicate whether a test email was
sent. If the test email is not received after the alert email
feature indicates that one was sent, the error is most likely
due to SMTP server settings. An error will occur if the SMTP
service is not running or if your appliance is not correctly
configured to see the SMTP server. Confirm your SMTP
server and network settings before trying to test again.
8. Click OK to complete.
To disable the alert email feature:
1. Navigate to Maintenance|Alerting|Alert Email.
2. Select Disable alert email.
3. Click OK to complete.
Quick Setup Finish
The finish screen provides any final instructions or information if necessary for
your installation. In addition, it provides a link to register your product with
Celestix. Access the finish screen through the web UI at Start|Quick
Setup|Quick Setup Finish.
Now that you have completed the configuration for your appliance, you are
ready to configure the HOTPin server application.
Configure the Application
This section explains the HOTPin server application setup on the appliance. You
will need to complete some or all of the following items – see descriptions for
information.
 Install your HOTPin license – required for all deployments.
 Configure System Settings – if you need to change default settings.
 Enable the User Website – if you want to allow users to set up their own
accounts, client software, and/or download token keys. The website is
required to support users with iPhone clients prior to version 3.0.