Installation guide

Celestix HOTPin Appliance Installation Guide Page | 26
3. Enter a User name and Password in the text fields provided.
4. Click OK.
5. You will be prompted to reboot your appliance to complete the above
changes:
• Click OK to proceed with restarting your appliance.
• Click Cancel to skip restarting your appliance. (You will need to
restart the appliance later to complete the membership changes
to Network|Server Membership.)
The web UI will refresh and open to the Quick Setup screen after the appliance
has finished the configuration change.
Alert Email
Use the Alert Email function to allow/disallow your appliance to send system
alert messages through a network SMTP server to addresses you specify. SMTP
is required to use the Alert Email function. This section provides a brief
description of the configuration settings in the Alert Email web UI feature and
how to access them.
Please Note: Alert email is an optional configuration.
Use the following information to configure alert email:
 Send error alert email – select to enable your appliance to send alert
types where the level is set to Error.
 Send warning alert email – select to enable your appliance to send
alert types where the level is set to Warning.
 Send informational alert email – select to enable your appliance to
send alert types where the level is set to Information.
 To – indicate one or multiple recipients. For multiple addresses, use a
comma to separate each address.
 From – indicate an address that the recipient will recognize.
 With – enter your network SMTP server name or IP address.
 Test Settings – click this screen button to send a test email using the
settings you entered.
To enable the alert email feature:
1. Navigate to Maintenance|Alerting|Alert Email.
2. Select Enable alert email.
3. Select the check boxes for the alert levels (error, warning, critical) you
want email to be sent.
4. Enter a recipient address in the To field.