Installation guide

23 | Page Celestix HOTPin Appliance Installation Guide
 Status – indicates Up for adapters with connected cables; indicates
Down for either an unused adapter or a connection issue.
General Properties
Select a connector to enable the General Properties button. Use this function
to assign DHCP or static address configurations. A static address includes
these settings:
 Internet Protocol (IP) address
 Subnet mask
 Gateway address
You can also specify automatic or preferred DNS server settings on this screen.
To access network connection configuration:
Navigate to Network|Interfaces. 1.
Select an adapter. 2.
Click General Properties. 3.
When you are done entering information, click the OK button to save 4.
your settings.
Important: An interface, or adapter, must be connected before it can be
configured. A warning will be displayed if you attempt to configure
an unconnected adapter.
Date/Time
This section provides a brief description of the configuration settings in the date
and time web UI feature and how to access them.
To access date and time configuration:
Navigate to Maintenance|Date/Time. 1.
See the settings description below for information. 2.
Click the OK button to save your settings. 3.
Date and Time Settings Include:
 Date: format mm/dd/yyyy.
 Time: format hh:mm:ss am/pm.