Installation guide

Celestix HOTPin Appliance Installation Guide Page | 22
The main HOTPin screen is accessed when you click the HOTPin in the menu
bar:
Illustration 5 - HOTPin Main Screen
Quick Setup Steps
The following sections provide instructions for basic appliance configuration.
They are presented in the order in which you should complete them. You can
access Quick Setup through the Start menu in the web UI.
Interfaces
The Interfaces function provides access to appliance network adapter
configuration. A network adapter is used for Ethernet connections and is both
the physical interface, or connector, and the hardware for access to a network.
An adapter is also commonly referred to as an adapter card or a network
interface card (NIC). This section provides a brief description of the
configuration settings in the Interfaces web UI feature and how to access them.
Use the Interfaces function to assign either DHCP or static IP addresses to
network adapters.
The list of interfaces includes the following information:
 Name – displays Ethernet connection identification.
 Device Name – displays hardware adapter identification.
 IP Address – displays the Internet Protocol address.
 Configuration – indicates either a DHCP or Static IP address.