Installation guide

13 | Page Celestix HOTPin Appliance Installation Guide
Network Settings
The following general conditions apply to the instructions contained in this
guide. Again, your network settings may differ and could require some
adjustment to the general information presented herein.
 Your LAN is configured for DHCP. You will use DHCP initially to assign
an IP address to the LAN0 network adapter. You can find the assigned
IP address on the front panel display.
 Instructions generally refer to Active Directory (AD) as an example
domain controller.
 Instructions to access the web user interface (web UI) cover a client
computer running Internet Explorer
®
7.0 or higher.
Note: IE running on a Windows
®
computer is required to access the
web UI’s full functionality.
 You have static IP addresses reserved for network adapters as needed.
Network Information Worksheet
It will be helpful if you gather and verify your network information before you
begin appliance installation and setup. By filling out the Network Planning
worksheet, you can expedite your installation. An example of the worksheet is
provided below with descriptions for the information it includes. A blank copy of
the worksheet is included in the Appendix for your use.
Please Note: Incorrect network configuration could compromise or impede the
HOTPin appliance.