System information

23 | P a g e Celestix DAX Series Quick Start Guide
2. Select Enable alert email.
3. Select the check boxes for the alert levels (error, warning, critical) you want
email to be sent.
4. Enter a recipient address in the To field.
5. Enter a send address in the From field.
6. Enter your network’s SMTP gateway name or IP address in the With field.
7. To test the email delivery, click Test Settings.
Note: The alert email function will indicate whether a test email was sent. If
the test email is not received after the alert email feature indicates
that one was sent, the error is most likely due to SMTP server settings.
An error will occur if the SMTP service is not running or if your
appliance is not correctly configured to see the SMTP server. Confirm
your SMTP server and network settings before trying to test again.
8. Click OK to complete.
To disable the alert email feature:
1. Navigate to Maintenance|Alerting|Alert Email.
2. Select Disable alert email.
3. Click OK to complete.
Quick Setup Finish
The finish screen provides any final instructions or information if necessary for your
installation. In addition, it provides a link to register your product with Celestix.
Access the finish screen through the web UI at Start|Quick Setup|Quick Setup
Finish.
You have completed the initial setup for your appliance. The next section, TMG
Configuration explains how to access the application tool that will help you finish
deploying the appliance on your network.