System information

Celestix DAX Series Quick Start Guide Page | 22
2. Select the Domain option and enter your network domain name in the text
field.
3. Enter a User name and Password in the text fields provided.
4. Click OK.
5. You will be prompted to reboot your appliance to complete the above
changes:
 Click OK to proceed with restarting your appliance.
 Click Cancel to skip restarting your appliance. (You will need to restart
the appliance later to complete the membership changes to Network
|Server Membership.)
The web UI will refresh and open to the Quick Setup screen after the
appliance has finished the configuration change.
Alert Email
Use the Alert Email function to allow/disallow your appliance to send system alert
messages through a network SMTP server to addresses you specify. SMTP is required
to use the Alert Email function. This section provides a brief description of the
configuration settings in the Alert Email web UI feature and how to access them.
Note: Alert email is an optional configuration.
Use the following information to configure alert email:
 Send error alert email – informs your appliance to send alert types where
the level is set to Error.
 Send warning alert email – informs your appliance to send alert types
where the level is set to Warning.
 Send informational alert email – informs your appliance to send alert types
where the level is set to Information.
 To – indicate one or multiple recipients. For multiple addresses, use a comma
to separate each address.
 From – indicate an address that the recipient will recognize.
 With – enter your network SMTP server name or IP address.
 Test Settings – click this screen button to send a test email using the
settings you entered.
To enable the alert email feature:
1. Navigate to Maintenance|Alerting|Alert Email.