System information

19 | P a g e Celestix DAX Series Quick Start Guide
 Configuration – indicates either a DHCP or Static IP address.
 Status – indicates Up for adapters with connected cables; indicates Down for
either an unused adapter or a connection issue.
General Properties
Select a connector to enable the General Properties button. Use this function to
assign DHCP or static address configurations. A static address includes these settings:
 Internet Protocol (IP) address
 Subnet mask
 Gateway address
You can also specify automatic or preferred DNS server settings on this screen.
To access network connection configuration:
1. Navigate to Network|Interfaces.
2. Select an adapter.
3. Click General Properties.
Note: An interface, or adapter, must be connected before it can be configured. A
warning will be displayed if you attempt to configure an unconnected adapter.
Date/Time
This section provides a brief description of the configuration settings in the date and
time web UI feature and how to access them.
To access date and time configuration:
1. Navigate to Maintenance|Date/Time.
2. See the settings description below for information.
Date and Time Settings Include:
 Date: format mm/dd/yyyy.
 Time: format hh:mm:ss am/pm.
 Time zone: select a city that represents your time zone from the drop menu.
 Automatically adjust clock for daylight savings: select to instruct the
server to change time according to daylight saving/standard time.