System information

Celestix DAX Series Quick Start Guide Page | 12
Note: Your appliance hardware may look somewhat different from the example, but
the general principle applies.
Network Interface LED indicators:
Each of the network adaptors contains a pair of lights to help identify connection
speed and usage. See below for details (listed by model number:
 6200
 Right light – displays connection speed (unlit 10Mbps, green 100
Mbps, orange 1000 Mbps).
 Left light – displays activity (blinking indicates traffic, unlit indicates
no traffic).
 8200
 Right light – displays connection.
 Left light – displays activity (blinking indicates traffic, unlit indicates
no traffic).
Power Your Celestix Appliance
The following instructions guide you through connecting power and turning on your
appliance.
To connect your appliance to a power source:
1. Connect the power cable(s) from your
power source (typically a UPS) to the
power inlet on the rear panel. The power
cable is included in the appliance
packaging.
2. The display will show the System Off message: