System information

Celestix DAX Series Quick Start Guide Page | 10
Range - IP Range, e.g. 192.168.1.1 to
192.168.1.10
Subnet - A Subnet Range, e.g.
192.168.1.0/255.255.255.0
Multiple combinations of the above may be
defined.
This information is needed in:
Configure : Front Panel Controls… : Configure
Remote Management…
Active
Directory
Server
IP Address:
Hostname:
This information may be needed for
application setup.
PKI
(if applicable)
IP Address:
This information may be needed for
application setup.
Application
Server
IP Address:
Hostname:
This information may be needed for
application setup.
Rack Your Appliance
Your Celestix appliance is a 1U or 2U device that should be attached to a standard
19-inch equipment rack as follows:
Note: If you’re appliance shipped with slides instead of brackets, see the
instructions included in the slide packaging for rack mounting procedures.
1. Select a secure location where only authorized personnel can access the
appliance.
2. Mount the appliance on your rack:
a. Use all the provided screws to attach mounting hardware to the front
right and left of the appliance.
b. Attach the appliance to the front supports of your equipment rack using