System information

9 | P a g e Celestix DAX Series Quick Start Guide

Lowercase letters

Number

Non-alphanumeric characters (for
example, !, $, #, %)
Note: The default user name is “administrator”
and the default password is “[Celest1x]” (case
sensitive, brackets included). The system
administrator should change the default
password in the Quick Setup steps.
This information is needed in:
Quick Setup : Administrator Password
Workgroup or
Domain name
Record the name of the Workgroup or Domain
that will be joined during setup.
This information is needed in:
Quick Setup : Server Membership
LAN Information (Eth 0)
Private or Internal Network Interface
IP Address:
Subnet Mask:
Default Gateway:
Primary/Secondary DNS Server(s):
Static Routes:
Network Address:
Gateway Address:
The LAN (private network interface) adapter of
the appliance is the interface assigned to
internal network traffic.
This information is needed in:
Quick Setup : Interfaces
WAN Information (Eth 1)
Public or External Network Interface
IP Address:
Subnet Mask:
Default Gateway:
Primary/Secondary DNS:
Primary/Secondary WINS:
The WAN (public network interface) adapter of
the appliance is the interface assigned to
external network traffic. This configures how
the WAN, or public interface connects to the
internet.
This information is needed in:
Quick Setup : Interfaces
DMZ (Eth 2 +) Information
Additional Network Interfaces
Include the IP Address/Subnet Mask
for each adapter you will use.
The DMZ adapters are optional configuration.
This information is only necessary if you will
assign static IP addresses to these adapters.
This information is needed in:
Quick Setup : Interfaces
Remote Management
Appliance IP address:
Range (from/to):
Subnet IP address/Subnet mask:
For security reasons, the default policy does
not allow connections to the appliance. To be
able to manage the appliance remotely,
Remote Management computers need to be
defined, and can be designated three ways:
Computer - Specific IP Address