Data Sheet

Compression Drivers / Ferrite

CDX1-1010

Very lightweight, low-profile ferrite magnet compression driver

15Wrms (AES standard) power handling and 107dB sensitivity, 1500-20,000Hz

frequency range

Finite Element Analysis (FEA) techniques used to optimise both magnetic

and acoustic design

Ideal for entry-level two-way and three-way sound reinforcement cabinets

CDX1-1020 variant supplied with partial phase plug assembly (for

applications where outer phase plug and horn form single moulding as part

of front baffle)

8 Ω Frequency Response

1. Tested for two hours on plane wave tube using continuous band-limited pink noise as per AES standard.

Power calculated on minimum impedance.

2. Measured on axis at 1W/1m, using typical horn, in 2 anechoic environment.

General Specifications

Power rating

15Wrms

Nominal impedance 8 Ω

Frequency range 1500-20,000Hz

Sensitivity

107dB

Recommended min. crossover (12dB/oct) 2200Hz

Voice coil diameter 25mm/1.0in

Voice coil material Copper clad aluminium

Magnet type Ferrite

Diaphragm material PETP film

Surround material PETP film

Mounting Information

Overall width 90mm/3.54in

Overall depth 52.8mm/2.08in

Fitting Screw (35mm/1.38in diameter)

Throat exit 25mm/1.0in

Unit weight 0.83kg/1.8lb

Packed Dimensions & Weight

Multi pack (16) size W x D x H 480mm x 480mm x 75mm

/18.9in x 18.9in x 2.95in

Multi pack (16) weight 15kg/33lb

Celestion, Claydon Business Park, Great Blakenham, Ipswich, IP6 0NL United Kingdom