Datasheet

2 | SR1A
tel: [phone] • +1.818.701.2750 • fax: [phone]
now part of Measurement Specialties, Inc.
celesco.com • [e-mail]
1.7” [45 mm]
13.6 ft. [4 M]
22 AWG (.34mm
2
)
contact view
2
3
1
4
+in 1 brown
common 2 white
+out 3 blue
n/c 4 black
output connector colorcode
signal pin (cordset)
Electrical Connection
Cable Exit Direction Options
Changing the Cable Exit
2.4” [60mm]
.25 in [6 mm]
max. cable dia.
contact view
2
3
1
4
Measuring Cable
Mounting Bracket
Electrical Connector
Rear Cover
see fig. 1
see fig. 2
see fig. 3
see fig. 4
+in (1)
com (2)+out (3)
10K Ω
Changing Measuring Cable Exit
To change the direction of the measuring cable,
remove the 4 mounting bracket screws and
rotate bracket to one of four available positions.
See gures 1 - 4 on the following pages for
mounting dimensions.
Changing Electrical Connector Direction
To change the position of the electrical connector,
remove the 4 rear cover screws and carefully sepa-
rate rear cover from the sensor body.
Rotate the rear cover to desired position being care-
ful to not tangle the wiring harness that runs to the
connector.