User's Manual

Page | 6
Fill BBs into the provided BB loader. The BB loader is marked with numbers to indicate the
amount of BBs you put into it. Avoid contacting the BBs with bare hands since moisture, oil or
dirt may be transferred onto the BBs and affect the projectile.
Place the mouth of the BB loader over the magazine’s feeding port. When you start feeling
resistance while pressing the lever, it shows the magazine is already full or BBs are misaligned.
It is important not to overload the magazine as this will prevent the BBs from jamming. If the
BBs are misaligned, stop loading it, take the BBs out and reload it again.
ALWAYS KEEP AND CARRY YOUR CTW UNLOADED, EXCEPT WHEN YOU INTEND TO
SHOOT