Manualshelf

Owner`s manual

ManualsBrandsCelair ManualsAir ConditionerProfile Series
12345678910
Controls Operation
P
ROFILE
S
ERIES
O
WNER
’
S
M
ANUAL
TEK600
S
ERIES
C
ONTROL
Page 8
Timer Function
The timer function operates either in Automatic or Manual modes and is designed to switch
the unit ON or OFF in a pre-set period (two, four or eight hours).
Note: Once the time function has activated or deactivated the unit, it will remain in this mode
until another selection has been made at the wall control.
Timer ON
• To switch the unit ON in a pre-set time, firstly select FAN, COOL, or AUTO. Adjust the
dial to your selected position. Press the same button again to turn the unit back to
the off mode.
• Select the desired time to switch the unit back on in two, four, or eight hours by
pressing the TIMER button until your selected time appears which is indicated by the
green light.
• The option that has been selected will begin to flash rapidly. This is indicating to the
user that the mode selected will start in the selected time.
• If the owner wants to start the unit instead of waiting for the timer, press the button that
the green light is flashing once then press the same button once more to start the unit.
This can be indicated by the green light coming on near the button selected.
*NOTE: Repeated TIMER button presses selects the desired time and also disables
the timer. The green lights near the two, four, or eight-hour time selections must be
illuminated else the timer is in the disabled mode.
Timer OFF
• The timer off mode will switch off the unit in the selected two, four, or eight hours.
• While the unit is running press the TIMER button to select the two, four, or eight-hour
time option.
• Once the time mode has been selected the unit will turn off in the selected time period
and remain in the off mode until pressing one of the function buttons (FAN, COOL, OR
AUTO) to restart it.
*NOTE: Repeated TIMER button presses selects the desired time and also disables
the timer. The green lights near the two, four, or eight-hour time selections must be
illuminated else the timer is in the disabled mode.