Specifications

getInfo(3) – Platform/Broad Firmware Category
The Platform indicates the model of module and firmware on which SNAP is running.
Possible Platform result codes for getInfo(3):
0 = Synapse RF100 SNAP Engine
1 = Reserved
2 = Reserved
3 = CEL ZIC2410
4 = Reserved
5 = MC1321x
6 = ATmega128RFA1
7 = SNAPcom
8 = Si100x
9 = MC1322x
10 = IT700
11 = Si100x KADEX
12 = Reserved
13 = Synapse RF300 SNAP Engine
14 = Synapse RF200 SNAP Engine
15 = Synapse SM300 Surface Mount Module
16 = Synapse SM301 Surface Mount Module
17 = Synapse SM200 Surface Mount Module
18 = Reserved
19 = Synapse RF266
20 = STM32W108xB
getInfo(4) – Build
The Build indicates whether the firmware in your SNAP module is a “debug” build or a “release”
build.
Possible Build result codes for getInfo(4):
0 = “debug” build (more error checking, slower speed, less SNAPpy room)
1 = “release” build (less error checking, faster speed, more SNAPpy room)
getInfo(5), getInfo(6), getInfo(7) – Version
By using getInfo(5), getInfo(6), and getInfo(7) to get the Major, Minor and Build components of the
Version, you can retrieve all three digits of the firmware version number.
SNAP Reference Manual Document Number 600-0007K Page 53 of 202