Specifications

getInfo(1) – Primary Communications Interface
The Network Interface indicates the means the node uses to connect to the rest of the network.
Possible Network Interface result codes for getInfo(1):
0 = 802.15.4
1 = None (Serial communications only)
2 = Reserved
3 = 868 MHz
4 = Powerline
5 = 900 MHz Frequency-Hopping
(other interfaces may be supported in the future)
getInfo(2) – CPU
The CPU indicates the processor paired with the radio in the SNAP module.
Possible CPU result codes for getInfo(2):
0 = Freescale MC9S08GT60A
1 = ZIC 8051
2 = MC9S08QE
3 = Coldfire
4 = ARM7
5 = ATmega
6 = Si100x 8051
7 = X86
8 = UNKNOWN
9 = Reserved
10 = ARM CORTEX M3
(other CPUs may be supported in the future)
Page 52 of 202 SNAP Reference Manual Document Number 600-0007K