Specifications

Vendor-specific settings:
NV Parameter 64 is used on the PAN4561.
Bit 0x0001 – Indicates PAN4561 module is older (Rev B) hardware, and requires special handling for
I/O differences.
Users should verify this bit is set to 1 for the older units, and set to 0 for the newer (Rev C) units.
Performance Metrics
Because the PAN4561 module contains at its heart essentially the same 9S08 based processor as the
one used on the Synapse RF Engine, you can use the performance metrics given in the RF Engine
section of the document.
SNAP Reference Manual Document Number 600-0007K Page 143 of 202