Specifications

Pin Configuration of a PAN4561 in SNAP Engine Format
Pins that differ from Synapse RF Engines are highlighted in bold.
PinNo. Name Description
1 GND PowerSupply
2 GPIO0_TPM1CH2 GPI/OorTimer1Channel2(ex.PWMout)
3 GPIO1 GPI/O
4 GPIO2 GPI/O
5 GPIO3_RX_UART0 GPI/OorUART0DataIn
6 GPIO4_TX_UART0 GPI/OorUART0DataOut
7 GPIO5_CTS0 GPI/OorUART0CTSoutput
8 GPIO6_KBI5_RTS0 GPI/O,KeyboardInterrupt,orUART0RTSinput
9 GPIO7_RX_UART1 GPI/OorUART1DataIn
10 GPIO8_TX_UART1 GPI/OorUART1DataOut
11 GPIO9_KBI6_CTS1 GPI/O,KeyboardInterrupt,orUART1CTSoutput
12 GPIO10_KBI7_RTS1 GPI/O,KeyboardInterrupt,orUART1RTSinput
13 GPIO11_AD7 GPI/OorAnalogIn
14 GPIO12 GPI/O,CBUSCDATA,orSPIMOSI
15 GPIO13 GPI/O,CBUSCLK,orSPICLK
16 GPIO14_TPM2CH3
GPI/O,CBUSRDATA,SPIMISO
orTimer2Channel3(ex.limitedPWMout)
17 GPIO15_TPM2CH1 GPI/O,orTimer2Channel1(ex.limitedPWMout)
18 GPIO16_AD2 GPI/O,orAnalogIn
19 GPIO17_AD1 GPI/O,AnalogIn,orI
2
CSDA
20 GPIO18_AD0 GPI/O,AnalogIn,orI
2
CSCL
21VCC PowerSupply
22 PTG0/BKDG BackgroundDebugCommunications
23 RESET* ModuleReset,ActiveLow
24 GND PowerSupply
Page 142 of 202 SNAP Reference Manual Document Number 600-0007K