Specifications

• This mode uses less power than mode 1
• You can sleep for up to 32767 ticks using this mode
1 = the radio stays awake just enough to “count down” the sleep interval
• Parameter ticks is in units of 1.0 seconds
• The timing in this mode is more accurate
• This mode uses more power than mode 0
• You can sleep for up to 1073 ticks using this mode
Timers
Normally the RF100 uses timer 2 in the hardware for its system clock. Feature bit 0x40 of NV
Parameter 11 can be set to instruct SNAP to use timer 1 instead. This affects the availability of PWM
on associated pins. Refer to the Freescale documentation for details on how to make use of this.
Page 122 of 202 SNAP Reference Manual Document Number 600-0007K