Specifications

Scripts specific to the ATMEL ATmega128RFA1 Platforms
These scripts are meant to be run on the corresponding ATMEL hardware platform. See also the
scripts specific to the RF200, which is based on the ATmega128RFA1 chip.
Demos written for the ATMEL STK600 board will also run on a Dresden “RCB” board, but then any
references to “LED color” are wrong (All the LEDs are red on the “RCB” board, compared to the
red/yellow/green set on the STK600).
Script Name What it does
atFlasher.py Demonstrates light flashing on a Dresden RCB test
board with an ATmega128RFA1 node. This sample
script is deprecated and may not be included in future
releases.
atMcast.py Demonstrates participation of an Atmega128RFA1
on a Dresden RCB test board in a group of nodes
running McastCounter.py. This sample script is
deprecated and may not be included in future
releases.
pinWakeupATmega128RFA1.py
(synapse.pinWakeupATmega128RFA1.py)
Pin Wakeup functionality specifically for the
ATmega128RFA1-based modules. (imported
automatically by pinWakeup.py)
STK600.py (synapse.STK600.py) Defines and LED control routines for the STK600
board. This is imported by STK60demo.py.
STK600demo.py Implements an up/down binary timer on the STK600
demo board. Push the button to reverse the direction.
SNAP Reference Manual Document Number 600-0007K Page 113 of 202