Specifications

Scripts specific to the California Eastern Labs Platforms
These scripts are meant to be run on the corresponding CEL hardware platform.
Script Name What it does
pinWakeupZIC2410.py Configures the “wakeup” pins on a ZIC2410. (Imported
automatically by pinWakeup.py)
ZIC2410_PWM.py
(synapse.ZIC2410_PWM.py)
Support routines for accessing the two pulse-width
modulation pins on a ZIC2410.
ZIC2410_SE.py
(synapse.ZIC2410_SE.py)
Platform specific defines and enumerations for SNAP
Engines based on the ZICM2410 modules. (Imported
automatically by platforms.py)
ZIC2410EVB3.py Definitions for some of the hardware on the CEL EVB3
Evaluation Board
ZIC2410ledCycling.py Demonstrates the PWMs on the ZIC2410
ZIC2410spiTests.py Demonstrates accessing the AT25FS010 chip built-in to
the EVB1/2/3 Evaluation Boards, using SPI
ZicCycle.py Blinks all the LEDs on the EVB3 board
ZicDoodle.py Draws on the EVB1 LCD display, based on commands
from another node running ZicDoodleCtrl.py. This script
used functions deprecated as of release 2.4.
ZicDoodleCtrl.py Uses the potentiometers on the EVB2 board to control an
LCD display on an EVB1 board. This script used
functions deprecated as of release 2.4.
ZicDoodlePad.py Demonstrates the lcdPlot() built-in on a ZIC2410-LCD
demonstration board. This script (along with that
function) is deprecated.
zicHardTime.py
(synapse.zicHardTime.py)
How to reference the clock on the nodes based on the
ZIC2410 chips. (Imported automatically by hardTime.py)
ZicLinkQuality.py A ZIC2410 counterpart to the original
LinkQualityRanger.py
ZicMcastCtr.py A ZIC2410 counterpart to the original MCastCounter.py
script
ZicMonitor.py Reads some ADCs on a CEL EVB1 Evaluation Board,
plots the data in real-time on the EVB1 LCD display. This
script used functions deprecated as of release 2.4.
Page 112 of 202 SNAP Reference Manual Document Number 600-0007K