Specifications

Scripts specific to the Panasonic Platforms
These scripts are meant to be run on the corresponding Panasonic hardware platforms.
Script Name What it does
PAN4555.py Defines initialization routine to drive unavailable IO pins
as low outputs or pull them as high inputs. These IO pins
on the chip are unavailable on the module, but must be
configured for efficient sleep.
PAN4555_ledCycling.py Demonstrates extra PWMs on PAN4555
PAN4555_PWM.py Controls the additional PWMs on a PAN4555
PAN4555_SE.py Defines the GPIO pins on a PAN4555 SNAP Engine
pinWakeupPAN4555_SE.py Configures the “wakeup” pins on a PAN4555 SNAP
Engine. (Imported automatically by pinWakeup.py)
PAN4561_ledCycling.py Demonstrates extra PWMs on PAN4561
PAN4561_PWM.py Controls the additional PWMs on a PAN4561
PAN4561_SE.py Defines the GPIO pins on a PAN4561 SNAP Engine
pinWakeupPAN4561_SE.py Configures the “wakeup” pins on a PAN4561 SNAP
Engine. (Imported automatically by pinWakeup.py)
SNAP Reference Manual Document Number 600-0007K Page 111 of 202