User`s guide

FreeStar Pro SMAC Programmers’ Guide
Rev B 0006-00-08-02-000 Page 6 of 34
2.1.2 J-Link
Figure 2 – Photo, J-Link Debugging Probe
The IAR J-Link is necessary for in-circuit debugging.
 See
www.iar.com for more details and where to purchase.
 Download and install the latest driver from http://www.segger.com/download_jlink.html
2.2 PROJECT OVERVIEW
2.2.1 File Location on the CD
A complete IAR project, developed based on the BeeKit™ SMAC codebase is included on the
CEL CD in the directory \ZFSM-201\Application Source Files\CEL_SMAC_111_v1.2
\CEL_SMAC_111\. It is titled ‘CEL_SMAC_111.eww’.
 The project was based on the ‘Generic Application’ template in BeeKit™ (see Figure 3)
with changes to a few of the Application Source files.
Figure 3 – Screen, BeeKit – New Project
2.2.2 Changes to BeeKit Generated Files
The default project creates one application source file named generic_app.c contained in the
subdirectory \ZFSM-201\Application Source Files\ CEL_SMAC_111_v1.2 \CEL_SMAC_111
\Application\Source. See Table 2.