User`s guide

FreeStar Pro SMAC Programmers’ Guide
Rev B 0006-00-08-02-000 Page 14 of 34
2.9 MAIN IAR FEATURES
2.9.1 Building a Project
Under the ‘Project’ menu several options exist to ‘Make’, ‘Compile’, or ‘Rebuild All’ code.
Figure 11 – Screen, IAR Workbench – Project Menu
2.9.2 Downloading into Flash:
 Ensure J-Link is connected to PC though the USB cable.
 Ensure FreeStar Pro Evaluation Board is connected to the J-Link though the ribbon cable
plugged into the JTAG Header (J1).
 Ensure the power switch (SW6) is in the ON position as indicated by the red power LED
(D5) being on.
 Under the ‘Project’ menu select ‘Download and Debug’ as shown in Figure 12.