User`s guide

FreeStar Pro SMAC Programmers’ Guide
Rev B 0006-00-08-02-000 Page 12 of 34
2.6 GENERATING AN OUTPUT FILE
The IAR IDE does not generate a .bin file automatically. The user must do the following:
 Right click on the project name. In Figure 7 below the project name is
‘CEL_SMAC_104_DP’. Select ‘Options…’ from the drop down Menu List.
Figure 7 – Screen, IAR Workbench – Project Output Options
 In the category ‘Output Converter’, check the ‘Generate additional output’ box and in
the ‘Output format’ pull down box select ‘binary’ as shown in Figure 8. Click ‘OK’.
Figure 8 – Screen, IAR Workbench – Generating an Output File