User`s guide

FreeStar Pro SMAC Programmers’ Guide
Rev B 0006-00-08-02-000 Page 11 of 34
2.4 PLM AND SMAC SOURCE FILES
Additional source files are included in the project when made by BeeKit™ and stored in the
PLM and SMAC directories. They are shown in Figure 5 below.
Figure 5 – Screen, IAR Workbench – PLM and SMAC Source Files
2.5 DEBUG/RELEASE WORKSPACE MODE
During development it is strongly recommended that the ‘Workspace’ be kept in ‘Debug’ mode
as shown in Figure 6.
Figure 6 – Screen, IAR Workbench – Debug mode