User manual

Fig. 17. The web page for network setting of ADA-13021

5.2.2. SERIAL PORT CONFIGURATION

The configuration of serial port of ADA-13021 converter includes: port description, setting of port profile (operating mode) and setting

of serial transmission parameters (baud rate, data bits, parity, stop bits).

Select on left panel Configuration -> Serial Ports and then on a page Serial Port Configuration select [Port 1], will open the

configuration details page, includes:

– Port Profile Settings,

– Basic Serial Settings,

– Advanced Serial Settings,

5.2.2.1. SERIAL PORT PROFILE CONFIGURATION (OPERATING MODE)

Select on right panel Serial Port Configuration -> Port Profile Settings and then press Change Profile... will open the page Select

Port Profile for selection of available port profiles (fig. 18).

Configuration of profile used in typical solutions will be presented in next chapters.

The ADA-13021 operates properly in profiles as follow:

– RealPort

– TCP Sockets

– UDP Sockets

– Serial Bridge

Configuration of profiles will be presented in next chapters.

ADA-13021