Manualshelf

User manual

ManualsBrandsCEL-MAR ManualsMedia ConverterADA-13040MG
11121314151617181920
3.3.3. CONNECTION TO DEVICE WITH ACTIVE TRANSMITTER & PASSIVE RECEIVER
Fig. 12. Example connection of device with active transmitter and passive receiver to ADA-13021
3.3.4. CONNECTION TO DEVICE WITH PASSIVE TRANSMITTER & ACTIVE RECEIVER
Fig. 13. Example connection of device with passive transmitter and active receiver to ADA-13021
3.4. POWER SUPPLY CONNECTION
The power supply to the ADA-13021 converter should be DC (regulated) from 10 V= to 30V=. Nominal power is typically 3W, e.g. ZS-
12/250 or DR-15-24. Power cable from DC power supplies to device must not be longer than 3m.
Observe the polarity, connect positive (+) of DC power supplies to V+ and negative (-) end to V- terminal. ADA-13021 has the
protection from opposite connection power supply.
11
ADA-13021