TDS

Product Name
CeilingMAX
Manufacturer’s Name
Acoustic Ceiling Products, L.L.C.
July 22, 2008 Page 3
PRODUCT PROPERTIES
• MATERIAL, COMPOSITION, AND DESIGN
! Grid material: Virgin grade polyvinyl chloride (PVC)
! Laminated material: Acrylonitrile butadiene styrene terpolymer (ABS) plastic laminated
with hop stamping foil.
• SHAPE, MASS, AND DIMENSIONS
! Grid Components:
.1 Manufacturer’s Grid Style: Acoustic Ceiling Products, L.C.C. “CeilingMAX”
Grid Face Item # Description Dimensions
24 mm (15/16 inch) 100
105
Top Hanger 96 x 1-1/2 x 15/32 inches
2400 x 38 x 12 mm
24 mm (15/16 inches) 110
115
Runner 96 x 15/16 x 15/16 inches
2400 x 24 x 24 mm
24 mm (15/16 inches) 120
125
Cross Tee 23 x 15/16 x 15/16 inches
576 x 24 x 27 mm
24 mm (15/16 inches) 150
155
Wall Bracket 96 x 15/16 x 1-3/16 inches
2400 x 24 x 30 mm
24 mm (15/16 inches) 121
126
Tee 25 x 15/16 x 1 inches
635 x 24 x 30 mm
.2 Grid Nominal Size: 610 x 610 mm (24 x 24 inches), (24 x 48 inches)
.3 Profile: PVC, top hanger, runner, cross tee 24 mm (15/16 face width) 11/8 high:
.1 Runner: Extruded PVC at 610 mm (24 inches) on center.
.2 Cross Tees: Extruded PVC at 610 mm (24 inches) on center.
.3 Wall Bracket: Extruded PVC mechanically fastened to existing substrate
at 406 – 610 mm (16 – 24 inches) on center.
.4 Top Hanger: Extruded PVC mechanically fastened to existing substrate.
Top Hanger notches 620mm (24 inches) on center, starting at 300 mm (12
inches) from ends.
.4 Bottom of Runner Face Width: 24 mm (15/16 inch).
.5 Grid Accessories: Model 170 Suspension Clip, Model 180 Concrete Clip, Model
190 FRP Clip.
• SHOP FABRICATION AND ASSEMBLY
! All assembly is completed on site.
• FINISH, COLORS AND TEXTURES