Specification

Acoustic Ceiling Products (ACP) - CeilingMAX Section 09 53 33
August 21, 2007 PVC SURFACE MOUNT GRID SYSTEM
Digicon Information Inc. Page 6
The following paragraph describes the need for ceiling grid expansion joints where a ceiling passes
under and across the vertical plane of a building expansion joint. Most expansion joints require two (2)
parallel tees usually spaced to the same measurements as the building expansion joint - usually 1 or 2
inches. Each tee is supported over its length to each respective side of the building structural member.
H. Form expansion joints [as detailed.] [with two (2) parallel tees spaced [25] [50] ([1] [2]
inches) apart, supported from each respective structure above.]
3.3 SCHEDULE
Provide a schedule when various ceiling locations, ceiling assembly types, acoustic unit designs, or other
variables require listing for clarity. The following are examples to illustrate a scheduled item:
A. Public Areas: 600 x 1200 mm (24 x 48 inch) PVC surface mounted grid, Copper color.
B. Dining Areas: 600 x 600 mm (24 x 24 inch) PVC surface mounted grid, White color.
END OF SECTION