Technical Specifications

Acoustic Ceiling Products (ACP) - CeilingMAX Section 09 53 33
August 21, 2007 PVC SURFACE MOUNT GRID SYSTEM
Digicon Information Inc. Page 3
1.6 QUALITY ASSURANCE
A. Conform to CISCA requirements.
B. Grid Installer: Company specializing in installing the Products specified in this section,
authorized or certified in writing by the product manufacturer.
1.7 REGULATORY REQUIREMENTS
Use this article when a special code, regulation, or constructed assembly applies to the project; delete
this article if none apply. Coordinate Regulatory Requirements with the UL assembly ratings indicated in
the System Description article above.
A. Conform to applicable code for fire rated assembly.
1.8 PROJECT CONDITIONS
A. Section 01 32 13: Work scheduling.
B. Sequence work to ensure ceilings are not installed:
1. until building is enclosed,
2. sufficient heat is provided,
3. dust generating activities have terminated, and
4. overhead work is completed, tested, and approved.
1.9 DELIVERY, STORAGE AND HANDLING
A. Section 01 66 00 for storage and handling of materials.
B. Deliver materials in manufacturer's original, unopened, undamaged containers with
identification labels intact.
C. Store cartons laid flat, protected from exposure to sun, high temperatures and humidity
conditions as recommended by the manufacturer.
1.10 EXTRA MATERIALS
A. Section 01 78 46: Extra materials.
B. Provide the following to the Owner:
1. [____] m ([____] feet) of extra suspension main and cross runners.
2. a quantity of [5] [____] percent of all trim and accessories provided for the Work.
1.11 WARRANTY
A. Warranty: Refer to Section [01 78 00.] [________.]
B. Limited Warranty: Ten (10) years from product manufacturing defects.
Part 2 Products