Technical Specifications

Acoustic Ceiling Products (ACP) - CeilingMAX Section 09 53 33
August 21, 2007 PVC SURFACE MOUNT GRID SYSTEM
Digicon Information Inc. Page 2
B. ASTM D696 - Standard Test Method for Coefficient of Linear Thermal Expansion of
Plastics Between -30!C and 30!C With a Vitreous Silica Dilatometer.
C. ASTM D790 - Standard Test Methods for Flexural Properties of Un-reinforced and
Reinforced Plastics and Electrical Insulating Materials.
D. ASTM D792 - Standard Test Methods for Density and Specific Gravity (Relative
Density) of Plastics by Displacement.
E. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building
Materials.
F. CISCA (Ceilings & Interior Systems Contractors Association):
1. Ceiling Systems Handbook.
2. Acoustic Ceilings: Use and Practice.
G. ISO 4611 - Plastics - Determination of the Effects of Exposure to Damp Heat, Water
Spray and Salt Mist.
H. UL - Fire Resistance Directory.
I. USFDA (United States Food and Drug Administration).
1.4 SUBMITTALS FOR REVIEW
Do not request submittals if drawings sufficiently describe the products of this section or if proprietary
specifying techniques are used. Include a requirement for shop drawings only when special project
conditions exist or when reflected ceiling plans are not provided on the working drawings.
A. Section 01 33 00: Submission procedures.
B. Shop Drawings: Indicate grid layout and related dimensioning, junctions with other
work, interrelation of mechanical and electrical items related to system and [________].
C. Product Data: Provide data on PVC grid system components and accessories.
Include the following paragraph for submission of physical samples for selection of finish, colour, surface
texture, etc.
D. Grid Samples: Submit [two] [____] samples each, [200] [____] mm ([8] [____] inches)
long, of grid system [top hanger,] [main runner,] [cross tee,] [wall molding,] and
[________].
1.5 SUBMITTALS FOR INFORMATION
The following submittals are informational; responsive action by the Consultant is not required.
A. Section 01 33 00: Submission procedures.
B. Manufacturer's Installation Instructions: Indicate special procedures, perimeter
conditions requiring special attention, and [________].