Operating instructions

Customer Awareness Static UPS /Inverter
Technology use : DSP Sinewave
Capacity of Inverter : ……………..VA
No. of Battery use/DC voltage : ………..Nos / ……………Volt DC
Input Voltage range : (120V-280V) in normal mode
(180V-260V) in UPS mode
Output voltage : 230 Volt AC
Output current at full load : ……………….AMP
Output frequency : 50HZ+/- 1.0% (stable)
Output wave form : Sinewave
Static UPS front panel : ON/Off switch and LCD display
Rear panel : Mains MCB, Battery MCB, Bypass & switch, I/P Terminal
Block
& O/P Terminal Block Battery Connections
Battery Care : Please check the water level in the battery once in two
months.
Make sure Battery terminal should be clean.
Customer’s Sign ………………………………………… Engineer’s Sign………………………………………….
Name………………………………………………………… Name………………………………………………………..