User's Manual

• You accidentally pressed the device button to stabilize your treatment at a low

intensity level, prohibiting it from increasing.

• Your CEFALY Connected is not turned on.

Soluon:

• Cleanse your skin again with soap and water, and pat dry. Then reposition the

electrode, attach the CEFALY Connected and try powering it on again. To reposition

the electrode, start from the center and work your way outward toward each

corner, running your ngers several times along the entire surface of the electrode.

You want the electrode to be at and rm against your forehead skin.

• Use a mirror to make sure your CEFALY Connected is properly positioned on the

electrode. The magnetic contacts on the CEFALY Connected must be properly

secured by the corresponding magnetic contact zone on the electrode for the

CEFALY Connected to work properly. If the electrode is not positioned correctly

and is not at against your forehead, the contacts may not connect properly. To

reposition the electrode, start from the center of and work your way outward

Troubleshooting