Installation & Assembly

Before setting up your new Pergola, determine the properplacement for your
Posts.Themeasurementforthe8’x8’Kalamalkais116”x116”.Tobesureyourpostsare
square:diagonally(posttopost)themeasurementswillbe154½”.

We recommend that the posts are fixed to the ground, using saddle brackets (on
concrete) or steel postbases.Speakwith your  local hardware store to purchase these, as
theyarenotincludedinthiskit.


STEP1: a.Laypost(markedA)onflatsurface.PlacetheHeader(markedC)with
deepnotchfacingup71/2”fromtheTop.(AsshowninPhoto1)

 (Photo1)





STEP1: b.Drillpilotholeswitha1/8”bit,andthenattachtheHeadertothe
 PostusingLagScrews.(AsshowninPhoto2)

(Photo 2)