Instructions / Assembly

35 support@solowavedesign.com

Step 13: Window Wall Shutter Assembly

Part 3

F: Attach 1 (0336) Window Trim to each side of the opening in (0324) Shutter Wall Panel using 3 (TS) #6 x 30 mm

Trim Screws per board. Notice the pilot holes are towards the inside of the assembly. (g. 13.9 and 13.10)

G: Place (0333) Shutter Stop tight to top of (0396) Shutter Bottom and tight to the panel then attach to (0396)

Shutter Bottom using 3 (TS) #6 x 30 mm Trim Screws. (g. 13.10)

Wood Parts Hardware

9 x #6 x 30 mm Trim Screw

2 x Window Trim 3/8 x 1 x 16-5/16”

1 x Shutter Stop 5/8 x 1 x 13”

0336

0333

Note: Hole orientation

Fig. 13.9

0333

x 9

0336

Fig. 13.10

0324

Flush

0336

(hidden)

0396

Tight to Panel