Instructions / Assembly

26 [e-mail]
Step 9: Attach Roof to Assembly
Make sure assembly is square before proceeding in this Step.
A: With an adult helper lift the Roof Assembly from Step 3 onto the (0376) Soft Wides so the tips of the (0316)
Roof Sides are ush to the ends of each (0376) Soft Wide. (g. 9.1 and 9.2)
B: Attach (0376) Soft Wides to Roof Assembly with 3 (S2) #8 x 1-1/2” Wood Screws per soft. Make sure
screws go into each (0316) Roof Side and the outside Joists in the Roof Assembly. (g. 9.1 and 9.3)
Hardware
12 x #8 x 1-1/2” Wood Screw
S2
Fig. 9.1
0316
S2
0376
0316
Flush
0376
0321
0376
0320
Joist
0376
Fig. 9.3
Fig. 9.2
x 12
Roof Assembly
0316