Instructions / Assembly

22 [e-mail]
Step 5: Window Wall Assembly
A: Place (0324) Shutter Wall Panel tight to (0369) Corner Trim on (0322) Front Left Wall so the inside board is
ush to the inside edge of (0369) Corner Trim. Attach (0369) Corner Trim to (0324) Shutter Wall Panel with 5
(S26) #8 x 2” Pan Screws. (g. 5.1)
B: Place (0374) Top Side Panel on top of (0324) Shutter Wall Panel so the inside edges are ush. Notice the
middle pilot holes are towards the bottom of the board. Attach (0369) Corner Trim to (0374) Top Side Panel with 2
(S26) #8 x 2” Pan Screws. (g. 5.1)
C: Flush to the inside edges of the (0324) Shutter Wall Panel and (0374) Top Side Panel attach 1 (0369) Corner
Trim with 7 (S26) #8 x 2” Pan Screws. (g 5.1)
Wood Parts Hardware
1 x Corner Trim 1-1/8 x 1-1/8 x 44”
1 x Shutter Wall Panel 1-1/8 x 40 x 42-1/4”
1 x Top Side Panel 1-1/8 x 4 x 42-1/4”
0369
0324
x 7
Fig. 5.1
0374
S26
Notice hole location.
x 7
S26
Flush
0369
0322
0324
14 x #8 x 2” Pan Screw
Flush
0374
S26