Instructions / Assembly

20 [e-mail]
Step 3: Roof Assembly
Part 4
E: Tight to the Roof Panels attach 1 (0330) Top Roof Side Left and 1 (0337) Top Roof Side Right to each Roof
Support Assembly with 4 (S2) #8 x 1-1/2” Wood Screws per board so the peaks are tight and the bottom of each
board is ush to the bottom of each Roof Panel. Notice the pilot holes are towards the Roof Panel. (g. 3.7)
Wood Parts Hardware
16 x #8 x 1-1/2” Wood Screw
S2
2 x Top Roof Side Left 5/8 x 2 x 36-11/16”
2 x Top Roof Side Right 5/8 x 2 x 36-11/16”
0330
0337
Fig. 3.7
S2
0321
Notice holes
towards panel.
x 4 per
board
Tight
Flush
0337
0330
0320
0337
0330
(hidden)