Installation Guide

Fig. 22.1
Step 22: Attach Transom Front and Back
Part 1
A: If the space is too tight loosen the bolt at the front of the assembly, as shown in g. 22.2 then place (220)
Transom Panel Front on top of (082) SL Post and (040) Cafe Wall Window Panel, behind (127) Front Top so the
outside edge is ush to the outside edge of (082) SL Post as shown in g. 22.1 and 22.2.
B: From inside the assembly attach (220) Transom Panel Front to (127) Front Top with 3 (S15) #8 x 1-3/4” Wood
Screws. (g. 22.2)
C: Retighten the bolt loosened in Step A if loosened.
040
Front
Fig. 22.2
Hardware
1 x Transom Panel Front FSC 1-1/4 x 11-1/2 x 35-7/8”
220
Wood Parts
S15
220
Flush
082
127
Inside View
Front Wall
3 x #8 x 1-3/4” Wood Screw
S15
220
Loosen
this bolt
85 [e-mail]