Installation Guide

Hardware
E: Place (186) Centre Gable on (185) Sunburst, tight to the top of (192) Gable Bottom so the tip is centred at the
peak of the Gable Angle Support Assembly. (g. 19.6)
F: Place 1 (187) Side Gable tight to each side of (186) Centre Gable so they are tight to the top of (192) Gable
Bottom. (g. 19.6)
G: Attach (186) Centre Gable with 4 (S20) #8 x 1-3/8” Wood Screws, and both (187) Side Gables, with 3 (S20)
#8 x 1-3/8” Wood Screws per board, to (185) Sunburst, (190) Right Gable Angle and (191) Left Gable Angle, as
shown in g. 19.6.
Fig. 19.6
185
10 x #8 x 1-3/8” Wood Screw
S20
192
x 3
Wood Parts
Tight
Step 19: Gable Angle Support Assembly
Part 3
S20
S20
S20
x 4
x 3
187
187
186
1 x Centre Gable FSC 1 x 4 x 13-1/2”
2 x Side Gable FSC 1 x 4 x 8-1/2”
186
187
190
191
80 [e-mail]