Installation Guide

Hardware
Step 18: Roof Support Assembly
Part 3
E: Place (186) Centre Gable on (185) Sunburst, tight to the top of (184) SW Top so the tip is centred at the peak
of the Roof Support Assembly. (g. 18.6)
F: Place 1 (187) Side Gable tight to each side of (186) Centre Gable so they are tight to the top of (184) SW Top.
(g. 18.6)
G: Attach (186) Centre Gable with 4 (S20) #8 x 1-3/8” Wood Screws, and both (187) Side Gables, with 3 (S20)
#8 x 1-3/8” Wood Screws per board, to (185) Sunburst, (180) Roof Support and (181) Roof Support Left, as
shown in g. 18.6.
Fig. 18.6
10 x #8 x 1-3/8” Wood Screw
S20
187
x 3
Wood Parts
1 x Centre Gable FSC 1 x 4 x 13-1/2”
2 x Side Gable FSC 1 x 4 x 8-1/2”
186
187
180
181
186
187
S20
S20
S20
x 3
x 4
185
184
77 [e-mail]