Installation Guide

Step 11: Swing Wall Assembly
Part 1
Wood Parts
Hardware
Keep all bolts loose in this step.
A: Loosely attach (110) Ground SW to the bottom of (043) SW Side Panel using 4 (G8) 5/16 x 2” Hex Bolts (with
lock washer, at washer and t-nut). (g. 11.1, 11.2 and 11.3)
B: At each end of (110) Ground SW loosely attach 1 (111) Diagonal with 1 (G8) 5/16 x 2” Hex Bolt (with lock
washer, at washer and t-nut) per side. (g. 11.1 and 11.2)
Fig. 11.1
043
043
1 x Ground SW FSC 5/4 x 4 x 82-5/8”
2 x Diagonal FSC 2 x 3 x 42-1/4”
110
111
6 x 5/16 x 2” Hex Bolt
(5/16”lockwasher,5/16”atwasher,5/16”t-nut)
G8
5/16” T-Nut
5/16” Flat
Washer
5/16” Lock
Washer
Fig. 11.3
Fig. 11.2
G8
5/16” T-Nut
Inside
View
043
050
111
111
110
110
060
111
57 support@cedarsummitplay.com