Installation Guide

Step 5: Swing Side Panel Assembly
Part 4
Hardware
6 x 1/4 x 2-1/2” Wafer Lag
WL5
G: With a helper hold (051) SL Side Window Panel up against the left side edge of (043) SW Side Panel so the
bottom edges are ush. Attach both Corner Panel Brackets to (043) SW Side Panel with 2 (S8) #12 x 3/4” Pan
Screws per bracket. (g. 5.8 and 5.9)
Note: Make sure panels are square and ush to each other. (g. 5.10)
H: Pre-drill with a 3/16” drill bit, then fasten the (050) Narrow Window Panel and (051) SL Side Window Panel to
(043) SW Side Panel with 3 (WL5) 1/4 x 2-1/2” Wafer Lags per panel. (g. 5.8)
9
0
°
9
0
°
9
0
°
Fig. 5.10
051
Fig. 5.9
Fig. 5.8
Flush
WL5
WL5
S8
043
050
043
051
Corner Panel Bracket
4 x #12 x 3/4” Pan Screw
S8
36 [e-mail]