Installation Guide

Step 3: Rockwall Assembly
Part 2
10 x 1/4 x 1-1/4 Pan Bolt
 (1/4”lockwasher,3/16”atwasher&1/4”barrelnut)
10 x #8 x 1” Pan Screw
PB2
Hardware
Other Parts
10xRocks(green/yellow/burgundy)
S10
E: Alternating colours and shapes, attach 1 rock to each rock board using 1 (PB2) 1/4 x 1-1/4” Pan Bolt (with
lock washer, at washer and barrel nut) and 1 (S10) #8 x 1” Pan Screw per rock. (g. 3.4 and 3.5)
The Pan Screw is placed in the hole beneath the Pan Bolt. (g. 3.4 and 3.5)
Note: Make sure all hardware is used to secure each rock properly.
Fig. 3.4
3/16” Flat
Washer
1/4”
Barrel Nut
Fig. 3.5
S10
PB2
1/4” Lock
Washer
28 [e-mail]