Instructions / Assembly

12 [e-mail]
DWG. NO.
REV.
A
SHEET 2 OF 3
SIZE
SCALE:1:50
WEIGHT:
TNR3 Prep
Attach Lower SL Insert, MOD Side Lite using No.8 x 7/8` Truss Screws
SCALE:1:50 WEIGHT:
Details
SHEET 1 OF 3
REV.
A
DWG. NO.
SIZE
Use #12 x 2" Pan Screw to attach stake to Upright.
Fig. 2.1
x 14
Step 2: Attach Slide Wall Inserts
A: In the narrow opening of (2622) End Panel Assembly (Upper Jamb should already be installed), place the
MOD Side Lite from inside the assembly then attach to the panel and (2602) Upper Jamb with 14 (S0) #8 x 7/8”
Truss Screws. (g. 2.1 and 2.2)
B: In the wider opening of (2622) End Panel Assembly, tight to the bottom board place (8935) Lower SL Insert
from inside the assembly then attach to the panel and (2602) Upper Jamb with 4 (S0) #8 x 7/8” Truss Screws.
(g. 2.1 and 2.2)
Other Parts
1 x MOD Side Lite
Hardware
18 x #8 x 7/8” Truss Screw
S0
Fig. 2.2
2602
MOD Side Lite
MOD
Side Lite
Inside View
2622
2622
8935
Wood Parts
1 x Lower SL Insert 1.36 x 8-1/8 x 26-1/4”
8935
Inside View
2602
S0
8935
Tight
S0