Specification

21 [e-mail]
Step 7: TNR Brace Assembly
A: Attach (8965) TNR Upright to (8963) TNR Ground Brace with 1 (H8) 1/4 x 4-1/4” Hex Bolt (with lock
washer, at washer and t-nut) in the top hole. Make sure both boards are square then attach with 1 (S11)
#8 x 2” Wood Screw. (g. 7.1)
1 x #8 x 2” Wood Screw
1 x 1/4 x 4-1/4” Hex Bolt (1/4” lock washer, 1/4” at washer, 1/4” t-nut)
Hardware
Wood Parts
1 x TNR Ground Brace 1-1/4 x 3 x 32-1/4”
1 x TNR Upright 1-1/4 x 3 x 20-1/4”
8963
8965
1/4”
T-Nut
1/4” Flat
Washer
1/4” Lock
Washer
8963
H8
H8
S11
S11
8965
Fig. 7.1