Specification
16 support@cedarsummitplay.com
Fig. 4.4
Fig. 4.5
Step 4: Attach Flange Assembly to Fort
Part 2
D: Place (8934) SL Gusset tight to (2622) End Panel Assembly, ush to the top of the bottom opening and
attach to Flange Assembly with 2 (S6) #12 x 1” Pan Screws. (g. 4.4 and 4.5)
E: Pre-drill pilot hole with a 3/16” drill bit then attach (8934) SL Gusset to (2622) End Panel Assembly with 1
(WL5) 1/4 x 2-1/2” Wafer Lag (with at washer). (g. 4.4 and 4.5)
2 x #12 x 1” Pan Screw
1 x 1/4 x 2-1/2” Wafer Lag (1/4” at washer)
Wood Parts
1 x SL Gusset 1-1/4 x 3 x 15-3/4”
8934
1/4” Flat
Washer
WL5
WL5
S6
Flush
2622
2622
8934
8934
S6
Flange
Assembly
Flange
Assembly
Hardware