Installation Guide

 70  [e-mail]
WARNING:Bolt must not
exceed 1/2 thread past the nut
Hardware Other Parts
Step 33: Glider Assembly
Glider Rope
and Chain
Glider End
5/16 Flat
Washers
Glider Seat
5/16 x Glider
Long
Hex Bolt
5/16 Flat
Washer-Zinc
5/16 Lock Nut
5/16 Flat
Washer-Zinc
5/16 Lock
Nut
5/16 Lock
Nuts
A:Attach1GliderEndtotheGliderSeatusing15/16”GliderLongHexBolt(with2atwashersand1lock
nut).RepeatforthesecondGliderEnd.(g.33.1)
B:Install2GliderRopewithChainsintoeachGliderEndusing2-5/16”FlatWashersand1LockNutperrope.
(g.33.1)
Fig. 33.1
Glider may not be as
shown.
Appearance may vary.
2 x Glider End
1 x Glider Seat
1 x Glider Rope and Chain (pkg of 4)
2 x 5/16” Glider Long Hex Bolt
(5/16” at washer x 2, 5/16” lock nut)
8 x 5/16” Flat Washer
4 x 5/16” Lock Nut